November 3, 2018

The Grand Gobbler

Thanksgiving is just around the corner, and today I'm sharing my felt Grand Gobbler Turkey. I found this felt turkey project and free sewing pattern and instructions at Sewing.org. This was a quick, easy, and fun project that is perfect for Thanksgiving. 
I used the following materials for this project:
I cut out the pattern pieces and selected the colors of felt I wanted to use for my turkey.

Then I traced the pattern pieces onto the felt and cut them out.

I used the blanket stitch to sew together the two big tail pieces, the two small tail pieces, each set of wing pieces, and the body pieces. I used three pieces of brown embroidery floss, except on the body. Since I chose brown felt for the body, I used orange embroidery floss to stitch around the body pieces. I also lightly stuffed the tails and body, but not the wings.

I hot glued two black beads for the eyes, the wattle, and the beak.

I cut a strip of ribbon and made a bow.  I cut Vs into the ends. 

I threaded brown embroidery floss through the three 1/2 inch blue buttons for the body. I used orange embroidery floss for the seven 3/4 inch buttons for the large tail.

I attached the bow and buttons to the body using hot glue.  

Next, I hot glued the wings and body to the small tail. 

Then I glued on the large tail.  I also glued the buttons onto the large tail, and the grand gobbler is all done!


Gobble Gobble!
my gobbler hanging out on my buffet with some other fall decor 


Thank you for checking out my Grand Gobbler! 


5 comments:

  1. I love your turkey! I'm going to use it this Saturday at the Snickerdoodle link party as one of my features!

    ReplyDelete
  2. T'onna, this is just fabulous! I love it. Pinned!

    ReplyDelete
  3. How cute!! Thanks so much for linking up at #AThemedLinkup 4 for All Things Thanksgiving. Shared.

    ReplyDelete
  4. Visiting again to say thanks so much for linking up with me at #AThemedLinkup 32 for All Things Thanksgiving. Shared.

    ReplyDelete